BLUETTI Apex 300

Description

Power that adapts to your needs

BLUETTI Apex 300 combines the power of a home backup system with the flexibility of a portable power station. Its built-in 2764.8Wh capacity and 3840W AC output allow it to power essential household appliances, professional equipment, campervans, and off-grid systems.

• 2764.8Wh capacity
• 3840W rated AC output
• Peak power up to 7680W
• Automotive-grade LiFePO4 battery
• Up to 6000 cycles to 80% of original capacity
• Expandable up to 58kWh and 11.52kW system output
• UPS switching in approximately 20 ms
• Two independent solar inputs with total power up to 2400W

3840W of power for home and travel

The pure sine wave inverter delivers up to 3840W of continuous AC output and up to 7680W of peak power. This allows it to operate refrigerators, lighting, routers, computers, kitchen appliances, power tools, and other high-consumption equipment.

When multiple Apex 300 units are combined using compatible BLUETTI accessories, the system output can reach up to 11.52kW.

Modular capacity up to 58kWh

Apex 300 can operate independently or as part of an expandable energy system. Up to six compatible B300K, B300S, B300, or B500K batteries can be added to the station.

Depending on the selected configuration, the total capacity can be increased from 2764.8Wh to approximately 58kWh. This enables you to build a system for essential loads, complete home backup, a campervan, or extended off-grid use.

LiFePO4 battery for years of use

The built-in battery uses second-generation automotive-grade LiFePO4 cells. They provide up to 6000 cycles before retaining 80% of their original capacity and are designed for years of daily use.

The magnetic transformer, intelligent EnerBalance AI management, and multi-level efficiency system maintain stable operation and low self-consumption of around 20W in no-load mode.

Fast charging from a wall outlet

The standard AC input supports up to 2300W. With the optional BLUETTI Hub A1, the maximum AC charging power can reach 3840W, allowing the station to charge to 80% in approximately 45 minutes at a suitable temperature.

When expansion batteries are added, the maximum total input power of the system can reach 6240W.

Solar charging with two MPPT inputs

Apex 300 features two independent solar inputs, each supporting up to 1200W, a 12–60V DC range, and current up to 20A. The total direct solar input reaches 2400W.

In expanded systems with SolarX 4K and multiple Apex 300 units, the total solar charging power can reach up to 19.2kW. Actual performance depends on the configuration, solar panels, and additional accessories used.

A wide range of AC, USB, and DC outputs

• 230V AC outputs with total power up to 3840W
• 2 × USB-C up to 100W
• 2 × USB-A 15W
• 2 × vehicle outputs at 12V/10A or 24V/5A
• 2 × DC5521 outputs at 12V/10A or 24V/5A
• 1 × Anderson output at 12V/50A or 24V/25A

20 ms UPS for backup power

During a power outage, Apex 300 switches to battery power in approximately 20 ms. This helps essential loads such as a refrigerator, router, lighting, and a CPAP device continue operating with minimal interruption.

For critical equipment that requires completely uninterrupted power, checking its permitted switching time in advance is recommended.

Smart control with the BLUETTI app

The BLUETTI app enables remote system monitoring and control. You can monitor input and output power, battery level, charging modes, and the status of connected devices.

The station also supports real-time notifications about extreme weather conditions, which can help you prepare the system for an expected power outage.

Technical specifications

Package contents

• 1 × BLUETTI Apex 300
• 1 × AC charging cable
• 1 × vehicle charging cable
• 1 × grounding screw
• 1 × user manual